The SUI-A3 Series Ethernet switches are designed to operate in industrial environments at the edge of the network. On the factory floor, the SUI-A3 Series will provide flawless communications when you need it most. The SUI-A3 Series is a switch with the flexibility of eight Ethernet ports that may be configured in a variety of copper and fiber optic interfaces. Flexibility is the main feature of the SUI-A3 Series, it may be DIN rail, Panel or Rack mounted, and comes with power options to match the applications that require a tough, industrial, Ethernet switch.
● Complies with IEC61000-6-2 EMC standard
● 2048 MAC addresses
● 768K bits buffer memory
● 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
● Full wire-speed forwarding rate
● Alarms for power failure by relay output
● Redundant power inputs with Terminal Block or DC Jack
● -20°C to 60°C (-4°F to 140°F) operating temperature range
● Industrial aluminum case; Supports DIN-Rail, Panel or Rack Mounting installation
Technology |
Regulatory Approvals |
Standards: | ISO: |
● IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x | ● Manufactured in an ISO9001 facility |
Forward and Filtering Rate: | SAFETY: |
● 14,880pps for 10Mbps | ● UL60950-1, EN60950-1, IEC60950-1 |
● 148,810pps for 100Mbps | |
Packet Buffer Memory: | |
● 768K bits | EMI: |
Processing Type: | ● FCC Part 15, Class A |
● Store-and-Forward | ● EN61000-6-3 |
● Half-duplex back-pressure and IEEE802.3xfull-duplex flow control | EN55022 |
Address Table Size: | EN61000-3-2 |
● 2048 MAC addresses | EN61000-3-3 |
Latency: | EMS: |
● Less than 7.1µs | ● EN61000-6-2 |
Power |
● EN61000-4-2 (ESD Standards) |
Input: | Contact: + / – 4KV; Criteria B |
● Input Voltage: 12 to 30VDC (Terminal Block) | Air: + / – 8KV; Criteria B |
12VDC (DC Power Jack) | ● EN61000-4-3 (Radiated RFI Standards) |
Power Consumption: | 10V/m, 80 to 1000MHz; 80% AM Criteria A |
● 13.2W | ● EN61000-4-4 (Burst Standards) |
● Max. 1.1A@12VDC; 0.55A@24VDC | Signal Ports: + / – 4KV; Criteria B |
Mechanical |
D.C. Power Ports: + / – 4KV; Criteria B |
Casing: | A.C. Power Ports: + / – 4KV; Criteria B |
● Aluminum case/ IP20 | ● EN61000-4-5 (Surge Standards) |
Dimensions: | Signal Ports: + / – 1KV; Line-to-Line; Criteria B |
● 50mm (W) x 125mm (D) x 135mm (H) | D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B |
(1.97″ (W) x 4.92″ (D) x 5.31″ (H)) | A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B |
Weight: | ● EN61000-4-6 (Induced RFI Standards) |
● 0.8Kg (1.76lbs.) | Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A |
Installation: | D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A |
● DIN-Rail Mounting, Panel, Rack Mounting | A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A |
Interface |
● EN61000-4-8 (Magnetic Field Standards) |
Ethernet Port: | 30A/m @ 50, 60Hz; Criteria A |
● 10/100Base-TX: 8, 6 or 4 ports | Environmental Test Compliance: |
● 100Base-FX: 0, 1, 2 or 4 ports | ● IEC60068-2-6 Fc (Vibration Resistance) |
LED Indicators: | 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport) |
● Per Unit: Power Status (Power 1, Power 2) | ● IEC60068-2-27 Ea (Shock) |
● Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow) | 25g @ 11ms (Half-Sine Shock Pulse; Operation) |
Alarm Contact: | 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) |
● One relay output with current 1A@24VDC | ● IEC60068-2-32 Ed (Free Fall) |
Environment |
1M (3.281ft.) |
Operating Temperature: | |
● -20°C to 60°C (-4°F to 140°F) | |
Storage Temperature: | |
● -40°C to 85°C (-40°F to 185°F) | |
Ambient Relative Humidity: | |
● 5% to 95% (non-condensing) |
SUI-A3008 | 8*10/100TX Industrial Unmanaged Ethernet Switch; -20°C to 60°C |
SUI-A3108-M-SC | 8*10/100TX + 1*100FX(Multi mode; SC; 2Km) Industrial Unmanaged Ethernet Switch; -20°C to 60°C |
SUI-A3108-S-SC20 | 8*10/100TX + 1*100FX(Single mode; SC; 20Km) Industrial Unmanaged Ethernet Switch; -20°C to 60°C |
Designation | Typical Distance | Nominal Wavelength | Cable Type | Connector | Power Budget |
100Base-FX | 2 Km | 1310 nm | 62.5/125 MM | ST | 15 dB |
100Base-FX | 2 Km | 1310 nm | 62.5/125 MM | SC | 15 dB |
100Base-FX | 20 Km | 1310 nm | 10/125 SM | ST | 19 dB |
100Base-FX | 20 Km | 1310 nm | 10/125 SM | SC | 19 dB |
100Base-FX | 40 Km | 1310 nm | 10/125 SM | ST | 30 dB |
100Base-FX | 40 Km | 1310 nm | 10/125 SM | SC | 30 dB |
100Base-FX | 60 Km | 1310 nm | 10/125 SM | ST | 33 dB |
100Base-FX | 70 Km | 1310 nm | 10/125 SM | SC | 34 dB |
100Base-FX | 80 Km | 1550 nm | 10/125 SM | ST | 29 dB |
100Base-FX | 90 Km | 1550 nm | 10/125 SM | SC | 32 dB |
MM: | Multi mode |
SM: | Single mode |
Installation: | DIN Rail (mounting kit is included) |
Power Connector: | Terminal Block |