3F,#1-10 Sec. 5 Zhong Xiao E Rd. 11071 Taipeimarketing@WiLCONN.comMon.- Fri. 09:00~18:00

SUI-A1 Series

 16 * 10/100Base extended temperature Dumb Industrial Ethernet Switch




The SUI-A1 series Industrial Ethernet switches are designed to operate in the harsh environments at the edge of the network. The SUI-A1 series functions at temperatures ranging from -40°C to75°C, whether on the factory floor or the street corner, the SUI-A1 series will provide flawless communications when you need it most. The SUI-A1 series is a switch with the flexibility of sixteen 10/100TX Ethernet ports that may be configured in a variety of different copper and fiber optic interfaces. It provides fourteen 10/100TX copper ports plus two 100FX ports. Flexibility is the main feature of the SUI-A1 series, it may be DIN rail or panel mounted.


Product Information

● Complies with IEC61000-6-2 EMC standard
● 4096 MAC addresses
● 1.625M bits buffer memory
● 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
● Full wire-speed forwarding rate
● Alarms for power failure by relay output
● Redundant 12 ~ 48VDC Power inputs or 12VDC Jack
● -40°C to 75°C operating temperature range
● Rugged aluminum case
● Supports DIN-Rail, Panel Mounting installation


Regulatory Approvals

Standards: ISO:
● IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x ● Manufactured in an ISO9001 facility
Forward and Filtering Rate: SAFETY:
● 14,880pps for 10Mbps ● UL508, EN60950-1, IEC60950-1
● 148,810pps for 100Mbps EMI:
Packet Buffer Memory: ● FCC Part 15, Class A
● 1.625M bits ● EN61000-6-3
Processing Type: EN55022
● Store-and-Forward EN61000-3-2
● Half-duplex back-pressure and IEEE802.3xfull-duplex flow control EN61000-3-3
Address Table Size: EMS:
● 4096 MAC addresses ● EN61000-6-2


● EN61000-4-2 (ESD Standards)
Input: Contact: + / – 4KV; Criteria B

● Input Voltage: 12 to 48VDC (Terminal Block);

     12VDC (DC Jack)

Air: + / – 8KV; Criteria B
Power Consumption: ● EN61000-4-3 (Radiated RFI Standards)
● 8.4W Max , 0.7A @12VDC 10V/m, 80 to 1000MHz; 80% AM Criteria A
● 0.35A@24VDC,0.175A@48VDC ● EN61000-4-4 (Burst Standards)
Power Supply References: Signal Ports:          + / – 4KV; Criteria B
● Terminal Block: 12 to 24VDC, 1.5A D.C. Power Ports: + / – 4KV; Criteria B
Overload Current Protection: A.C. Power Ports: + / – 4KV; Criteria B
● Yes ● EN61000-4-5 (Surge Standards)
Reverse Polarity Protection: Signal Ports: + / – 1KV; Line-to-Line; Criteria B
● Yes D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B


A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B
Casing: ● EN61000-4-6 (Induced RFI Standards)
● Aluminum case Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
● IP30 D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
Dimensions: A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
● 75.5mm (W) x 110mm (D) x 135mm (H) ● EN61000-4-8 (Magnetic Field Standards)
     (2.98″ (W) x 4.33″ (D) x 5.31″ (H)) 30A/m @ 50, 60Hz; Criteria A
Weight: Environmental Test Compliance:
● 0.87Kg (1.92lbs.) ●  IEC60068-2-6 Fc (Vibration Resistance)
Installation: 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
● DIN-Rail, Panel Mounting ●  IEC60068-2-27 Ea (Shock)


25g @ 11ms (Half-Sine Shock Pulse; Operation)
Ethernet Port: 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
● 10/100Base-TX: 16, 15 or 14 ports ●  IEC60068-2-32 Ed (Free Fall)
● 100Base-FX: 0, 1 or 2 ports 1M (3.281ft.)
LED Indicators:
● Per Unit: Power Status (Power1, Power2, Power3)
● Per Port: 10/100TX, 100FX: Link/Activity
Alarm Contact:
● One relay output with current 1A@24VDC


Operating Temperature:
● -40°C to 75°C (-40°F to 167°F)
Storage Temperature:
● -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity:
● 5% to 90% (non-condensing)


Order Information
 SUI-A1016E  16 * 10/100TX unmanaged Ethernet Switch
 SUI-A1115E-M-SC  15 * 10/100TX + 1 * 100FX(multi mode, SC 2Km) unmanaged Ethernet Switch
 SUI-A1115E-S-SC20  15 * 10/100TX + 1 * 100FX(single mode, SC 20Km) unmanaged Ethernet Switch
MM: Multi mode
SM: Single mode
Installation: DIN Rail (mounting kit is included)
Power Connector: Terminal Block