MUI-A1 Series
1*10/100TX to 1*100FX extended temperature Industrial Media Converter
Download Data Sheet
Overview:
MUI-A1 series, Fast Ethernet media converters are designed to operate in harsh environments. The MUI-A1 series functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F), Whether on the factory floor or the street corner, the MUI-A1 series will provide flawless communications when you most need it most. MUI-A1 series are available in all types of fiber cabling and connector types. The RJ-45 port on this unit provides Auto-MDIX and auto-negotiation. The link-fault-pass-through feature allows the network management agent on adjacent equipment to react to a broken link. Flexibility is the main feature of the MUI-A1 series, it may be DIN rail or panel mounted, and comes with power options to match the applications that require a tough, environmentally hardened, Fast Ethernet media converter.
Product Information
Features
● Complies with IEC61000-6-2 EMC standard
● UL 1604 Class 1, Division 2 Classified for use in hazardous locations (applicable to versions with terminal block power option)
● DIP switch configuration for “Link-Fault-Pass-Through”, link down alarm, speed, duplex mode
● 2048 MAC addresses
● 768K bits buffer memory
● 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
● Full wire-speed forwarding rate
● Alarms for power and port link failure by relay output
● Redundant power inputs with Terminal Block or DC Jack
● -40°C to 75°C (-40°F to 167°F) operating temperature range
● Hardened aluminum case
● Supports DIN-Rail, Panel, or Rack Mounting installation
Specifications
Technology |
Regulatory Approvals |
| Standards: | ISO: |
| ● IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x | ● Manufactured in an ISO9001 facility |
| Forward and Filtering Rate: | SAFETY: |
| ● 14,880pps for 10Mbps | ● Hazardous locations: Class 1, Division 2 group A, B, C&D |
| ● 148,810pps for 100Mbps | ● UL60950-1, EN60950-1, IEC60950-1 |
| Packet Buffer Memory: | EMI: |
| ● 768K bits | ● FCC Part 15, Class A |
| Processing Type: | ● EN61000-6-3 |
| ● Store-and-Forward | EN55022 |
| ● Half-duplex back-pressure and IEEE802.3x full-duplex flow control | EN61000-3-2 |
| Address Table Size: | EN61000-3-3 |
| ● 2048 MAC addresses | EMS: |
| Latency: | ● EN61000-6-2 |
| ● Less than 129µs | ● EN61000-4-2 (ESD Standards) |
Power |
Contact: + / – 4KV; Criteria B |
| Input: |
Air: + / – 8KV; Criteria B |
| ● Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) | ● EN61000-4-3 (Radiated RFI Standards) |
| Power Consumption: | 10V/m, 80 to 1000MHz; 80% AM Criteria A |
| ● 9.12W MAX. 0.76A @ 12VDC, 0.38A @ 24VDC, 0.19A @ 48VDC | ● EN61000-4-4 (Burst Standards) |
| Power Supply References: | Signal Ports: + / – 4KV; Criteria B |
| ● Terminal Block: 12 to 24VDC, 1.5A |
D.C. Power Ports: + / – 4KV; Criteria B |
| DC Jack: 12VDC, 3A | A.C. Power Ports: + / – 4KV; Criteria B |
| Current Protection: | ● EN61000-4-5 (Surge Standards) |
| ● YES | Signal Ports: + / – 1KV; Line-to-Line; Criteria B |
| Reverse Polarity Protection: |
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B |
| ● YES |
A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B |
Mechanical |
● EN61000-4-6 (Induced RFI Standards) |
| Casing: | Signal Ports: 10Vrms @ 0.15~80MHz; 80% AMCriteria A |
| ● Aluminum case |
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A |
| ● IP20 | A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A |
| Dimensions: | ● EN61000-4-8 (Magnetic Field Standards) |
| ● 50mm (W) x 110mm (D) x 135mm (H) (1.97″ (W) x 4.33″ (D) x 5.31″ (H)) |
30A/m @ 50, 60Hz; Criteria A |
| Weight: | ● EN61000-4-11 (Voltage Dip Standards) |
| ● 0.8Kg (1.76lbs.) | A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B |
| Installation: | Environmental Test Compliance: |
| ● DIN-Rail, Panel, Rack Mounting | ● IEC60068-2-6 Fc (Vibration Resistance) |
Interface |
5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport) |
| Ethernet Port: | ● IEC60068-2-27 Ea (Shock) |
| ●10/100Base-TX: 1 port |
25g @ 11ms (Half-Sine Shock Pulse; Operation) |
| ●100Base-FX: 1 port |
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) |
| LED Indicators: | ● IEC60068-2-32 Ed (Free Fall) |
| ●Per Unit: Power Status (Power 1, Power 2, Fault), Link-Fault-Pass-Through | 1M (3.281ft.) |
| ●Per Port: 10/100TX: Link/Activity, Full-duplex/Collision, Speed 100FX: Link/Activity, Full-duplex/Collision | |
| Alarm Contact: | |
| ●One relay output with current 1A@24VDC | |
Environment |
|
| Operating Temperature: | |
| ● -40°C to 75°C (-40°F to 167°F) | |
| ● Tested @ -40°C to 85°C (-40°F to 185°F) | |
| Storage Temperature: | |
| ● -40°C to 85°C (-40°F to 185°F) | |
| Ambient Relative Humidity: | |
| ● 5% to 95% (non-condensing) |
Order Information
Type of 100Base-FX:
| MUI-A1101E-M-SC | 10/100TX to 100FX (Multi mode; SC; 2Km) extended temperature industrial media converter |
| Designation | Typical Distance | Nominal Wavelength | Cable Type | Connector | Power Budget |
| 100Base-FX | 2 Km | 1310 nm | 62.5/125 MM | ST | 15 dB |
| 100Base-FX | 2 Km | 1310 nm | 62.5/125 MM | SC | 15 dB |
| 100Base-FX | 20 Km | 1310 nm | 10/125 SM | ST | 19 dB |
| 100Base-FX | 20 Km | 1310 nm | 10/125 SM | SC | 19 dB |
| 100Base-FX | 40 Km | 1310 nm | 10/125 SM | ST | 30 dB |
| 100Base-FX | 40 Km | 1310 nm | 10/125 SM | SC | 30 dB |
| 100Base-FX | 60 Km | 1310 nm | 10/125 SM | ST | 33 dB |
| 100Base-FX | 70 Km | 1310 nm | 10/125 SM | SC | 34 dB |
| 100Base-FX | 80 Km | 1550 nm | 10/125 SM | ST | 29 dB |
| 100Base-FX | 90 Km | 1550 nm | 10/125 SM | SC | 32 dB |
| MM: | Multi mode |
| SM: | Single mode |
| Installation: | DIN Rail (mounting kit is included) |
| Power Connector: | Terminal Block |