3F,#1-10 Sec. 5 Zhong Xiao E Rd. 11071 Taipeimarketing@WiLCONN.comMon.- Fri. 09:00~18:00

SUI- A0 Series

5*10/100Base Dumb Industrial Ethernet Switch

-10~60°CDumbSwitch

 

Overview:

The SUI-A0 series compact Fast Ethernet Switches are equipped with 5-port 10/100TX or 4-port 10/100TX plus 1-port 100FX. By using standard auto-negotiation and the inclusion of auto-MDIX, WiLCONN, Inc. provides a cost-effective way of integrating legacy 10Mbps networks with 100Mbps Fast Ethernet networks. The TX ports auto-negotiate for 10/100Mbps speed and auto-detect Full or Half-duplex mode. The fiber port on SUI-A0104 accommodates SC and ST with a fiber connection between two nodes that can reach up to 90Km. SUI-A0 series can be DIN-Rail mounted and is equipped with Terminal Block power input to match the applications that require an Ethernet Switch.

 

Product Information

Features
  • Complies with IEC61000-6-2 EMC standard
  • 2048 MAC addresses
  • 384K bits buffer memory
  • 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
  • -10°C to 60°C operating temperature range
  • 0.2A(Max.) 12~24VDC Power inputs
  • Industrial plastic case
  • Supports DIN-Rail Mounting installation
  • Full wire-speed forwarding rate
Specifications

Technology

Regulatory Approvals

Standards: ISO:
● IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x ● Manufactured in an ISO9001 facility
Forward and Filtering Rate: SAFETY:
● 14,880pps for 10Mbps ● UL60950-1, EN60950-1, IEC60950-1
● 148,810pps for 100Mbps EMI:
Packet Buffer Memory: ● FCC Part 15, Class A
● 384K bits ● EN61000-6-3
Processing Type: EN55022
● Store-and-Forward EN61000-3-2
● Half-duplex back-pressure and IEEE802.3xfull-duplex flow control EN61000-3-3
Address Table Size: EMS:
● 2048 MAC addresses ● EN61000-6-2
Latency: ● EN61000-4-2 (ESD Standards)
● Less than 5.1µs Contact: + / – 4KV; Criteria B

Power

 Air: + / – 8KV; Criteria B
Input: ● EN61000-4-3 (Radiated RFI Standards)
● Input Voltage: 12 to 48VDC (Terminal Block) 10V/m, 80 to 1000MHz; 80% AM Criteria A
Power Consumption: ● EN61000-4-4 (Burst Standards)
● 2.4W Max. 0.2A@12VDC, Signal Ports:          + / – 4KV; Criteria B
● 0.1A@24VDC, 0.05A@48VDC D.C. Power Ports: + / – 4KV; Criteria B
Power Supply References: A.C. Power Ports: + / – 4KV; Criteria B
● Terminal Block: 12 to 24VDC, 1.5A ● EN61000-4-5 (Surge Standards)
Overload Current Protection: Signal Ports: + / – 1KV; Line-to-Line; Criteria B
● Yes D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B
Reverse Polarity Protection: A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B
● Yes ● EN61000-4-6 (Induced RFI Standards)

Mechanical

Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
Casing: D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
● Plastic case A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
● IP30 ● EN61000-4-8 (Magnetic Field Standards)
Dimensions: 30A/m @ 50, 60Hz; Criteria A
● 25mm (W) x 70mm (D) x 110mm (H) Environmental Test Compliance:
     (0.99″ (W) x 2.76″ (D) x 4.33″ (H)) ●  IEC60068-2-6 Fc (Vibration Resistance)
Weight: 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
● 0.2Kg (0.44lb.) ●  IEC60068-2-27 Ea (Shock)
Installation: 25g @ 11ms (Half-Sine Shock Pulse; Operation)
● DIN-Rail Mounting 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)

Interface

●  IEC60068-2-32 Ed (Free Fall)
Ethernet Port: 1M (3.281ft.)
● 10/100Base-TX: 5, 4 or 1 ports
● 100Base-FX: 0 or 1 ports
LED Indicators:
● Per Unit: Power Status (Power 1, Power 2)
● Per Port: 10/100TX,100FX: Link/Activity (Green), Speed (Yellow)

Environment

Operating Temperature:
● -10°C to 60°C (14°F to 140°F)
Storage Temperature:
● -25°C to 85°C (-13°F to 185°F)
Ambient Relative Humidity:
● 5% to 90% (non-condensing)
Order Information
 SUI-A0005   Industrial Unmanaged Switch with 5 port 10/100Base-TX
 SUI-A0104   Industrial Unmanaged Switch with 4 port 10/100Base-TX + 1 port 100Base-FX

Type of 100Base-FX:

Designation Typical Distance Nominal Wavelength Cable Type Connector Power Budget
100Base-FX 2 Km 1310 nm 62.5/125 MM ST 15 dB
100Base-FX 2 Km 1310 nm 62.5/125 MM SC 15 dB
100Base-FX 20 Km 1310 nm 10/125 SM ST 19 dB
100Base-FX 20 Km 1310 nm 10/125 SM SC 19 dB
100Base-FX 40 Km 1310 nm 10/125 SM ST 30 dB
100Base-FX 40 Km 1310 nm 10/125 SM SC 30 dB
100Base-FX 60 Km 1310 nm 10/125 SM ST 33 dB
100Base-FX 70 Km 1310 nm 10/125 SM SC 34 dB
100Base-FX 80 Km 1550 nm 10/125 SM ST 29 dB
100Base-FX 90 Km 1550 nm 10/125 SM SC 32 dB
MM: Multi mode
SM: Single mode
Installation: DIN Rail (mounting kit is included)
Power Connector: Terminal Block

Menu