SMI-A0 Series
8/16*10/100TX extended temperature SNMP Managed Ethernet Switch
Download Data Sheet
Overview:
Designed for the application in harsh environments, the SMI-A0 Series Switch comes with eight or sixteen 10/100TX ports with optional two combo Giga ports in a package that offers several mounting options. The SMI-A0 functions at temperatures ranging from -40°C to 75°C. It could be fully managed via SNMP, Web Browser, Telnet or Console port. The SMI-A0 is designed to integrate 10/100 Mbps networks into fiber optic Gigabit backbones. The 2 combo Gigabit ports can be copper or fiber optic ports. The SMI-A0 series supports advanced features such as 802.1Q VLAN, MAC-based Trunking, IP-Multicast IGMP Snooping, Rapid Spanning Tree for Redundancy, QoS for priority queuing, and port mirroring. Users may choose among SNMP/RMON, Web browser, or Telnet for remote monitoring and configuration. It also supports rate control, which allows users to set the maximum bandwidth on each port individually. WiLCONN, Inc. offers a line of products that provide a total solution for Ethernet applications in industrial and rugged environments.
Product Information
Features
● Complies with IEC61000-6-2 EMC Generic standard
● IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible
● Superior W-Ring network connection redundancy (recovery time< 25 ms)
● IP Multicast Filtering through IGMP Snooping
● Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
● IEEE802.1p QoS with four priority queues
● MAC-based trunking with automatic link fail-over
● RS-232 console, Telnet, SNMP V1& V2 & V3 , RMON, Web Browser, and TFTP Management
● Supports Command Line Interface in RS-232 Console
● Supports IEEE802.1x Security
● Bandwidth Rate Control
● Per-port programmable MAC address locking
● Up to 24 Static Secure MAC addresses per port
● Port mirroring
● 8192 MAC addresses
● 2M bits buffer memory
● 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
● Full wire-speed forwarding rate
● Alarms for power and port link failure by relay output
● Redundant power inputs with Terminal Block and DC Jack
● -40°C to 75°C (-40°F to 167°F) operating temperature range
● Hardened aluminum case
● Supports DIN-Rail, Panel Mounting installation
Specifications
Technology |
Regulatory Approvals |
| Standards: | ISO: |
| ● IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/1000Base-LX, IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1x | ● Manufactured in an ISO9001 facility |
| Protocols: | SAFETY: |
| ● IGMP, GVRP, SNMP V1/V2, RMON, TFTP | ● UL508, EN60950-1, IEC60950-1 |
| Forward and Filtering Rate: | EMI: |
| ● 14,880pps for 10Mbps | ● FCC Part 15, Class A |
| ● 148,810pps for 100Mbps | ● EN61000-6-3 |
| ● 1,488,100pps for 1000Mbps | EN55022 |
| Packet Buffer Memory: | EN61000-3-2 |
| ● 2M bits | EN61000-3-3 |
| Processing Type: | EMS: |
| ● Store-and-Forward | ● EN61000-6-2 |
| ● Half-duplex back-pressure and IEEE802.3x full-duplex flow control | ● EN61000-4-2 (ESD Standards) |
| Address Table Size: | Contact: + / – 4KV; Criteria B |
| ● 8192 MAC addresses | Air: + / – 8KV; Criteria B |
Power |
● EN61000-4-3 (Radiated RFI Standards) |
| Input: | 10V/m, 80 to 1000MHz; 80% AM Criteria A |
| ● Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) | ● EN61000-4-4 (Burst Standards) |
| Power Consumption: | Signal Ports: + / – 4KV; Criteria B |
| ● 9.12W MAX. 0.76A @ 12VDC, 0.38A @ 24VDC, 0.19A @ 48VDC |
D.C. Power Ports: + / – 4KV; Criteria B |
| wer Supply References: | A.C. Power Ports: + / – 4KV; Criteria B |
| ● Terminal Block: 12 to 24VDC, 1.5A | ● EN61000-4-5 (Surge Standards) |
| DC Jack: 12VDC, 3A | Signal Ports: + / – 1KV; Line-to-Line; Criteria B |
| Overload Current Protection: |
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B |
| ● YES | A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B |
| Reverse Polarity Protection: | ● EN61000-4-6 (Induced RFI Standards) |
| ● YES | Signal Ports: 10Vrms @ 0.15~80MHz; 80% AMCriteria A |
Mechanical |
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A |
| Casing: |
A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A |
| ● Aluminum case | ● EN61000-4-8 (Magnetic Field Standards) |
| ● IP20 | 30A/m @ 50, 60Hz; Criteria A |
| Dimensions: | ● EN61000-4-11 (Voltage Dip Standards) |
| ● 65mm (W) x 125mm (D) x145mm (H) | A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B |
| (2.56″ (W) x 4.92″ (D) x 5.71″ (H)) | Environmental Test Compliance: |
| Weight: | ● IEC60068-2-6 Fc (Vibration Resistance) |
| ● 1Kg (2.2lbs.) |
5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport) |
| stallation: | ● IEC60068-2-27 Ea (Shock) |
| ● DIN-Rail, Panel, Rack Mounting |
25g @ 11ms (Half-Sine Shock Pulse; Operation) |
Interface |
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) |
| Ethernet Port: | ● IEC60068-2-32 Ed (Free Fall) |
| ● 10/100Base-TX: 16, 12 or 8 ports | 1M (3.281ft.) |
| ● 100Base-FX:0, 1, 2 or 4 ports | |
| ● Gigabit: 0, 1 or 2 ports | |
| Console Port: | |
| ● Port: One DB9 RS-232 port | |
| LED Indicators: | |
| ● Per Unit: Power Status (Power 1, Power 2, Power 3) | |
| ● Per Port: 10/100Base: Link/Activity | |
| ● 1000Base: Link/Activity (Green: Copper, Amber: Fiber) | |
| Alarm Contact: | |
| ● One relay output with current 1A@24VDC | |
Environment |
|
| Operating Temperature: | |
| ● -40°C to 75°C (-40°F to 167°F) | |
| ● Tested @ -40°C to 85°C (-40°F to 185°F) | |
| Storage Temperature: | |
| ● -40°C to 85°C (-40°F to 185°F) | |
| Ambient Relative Humidity: | |
| ● 5% to 95% (non-condensing) |
Order Information
| SMI-A0016E | 16 * 10/100TX SNMP managed industrial Ethernet switch; extended temperature with W-Ring |
| SMI-A0008E | 8 * 10/100TX SNMP managed industrial Ethernet switch; extended temperature with W-Ringu |
| Installation: | DIN Rail (mounting kit is included) |
| Power Connector: | Terminal Block |